Hot fix applicator (thermocompression machine)

You can easily apply the hotfix with heat!!
* Since it is a machine, it will be shipped by courier.

Please refer to the following for usage. In addition, please note that the product has been opened once for inspection as it is an overseas product. In addition, since the packaging material is a soft case, there may be some dirt or cracks.

Note: Always unplug when not in use!
Even if the main power is turned off, there is a risk of fire if left unattended.

Body size Length: 19 cm Width: 3 cm
Applicator: 7 pieces! (2mm is ss6 size, 3mm is ss10 and ss12 size, 4mm is ss16 size, 5mm is ss20 size, 7mm is ss34 size, flat type is 5mm and 9mm) Total 7 pieces
Please use the flat type for stones that do not fit the applicator.
10-12W, 100-240V.
In the case of Hot-Fix gluing set on a heat-resistant film, turn on the power in advance and place an applicator that matches the size of the rhinestone on the place you want to glue. Seconds, 4 seconds for 3mm, 5 seconds for 4mm, release the applicator, press twice with your gloved fingertips, and peel off the film.

1. Lay the hotfix rhinestones on a flat surface, resin side down. Simply place the applicator with the appropriate size tip over the rhinestone lightly to attach the stone.

2. Depending on the size of the stone, with the part with the rhinestone facing upwards, for example, 2mm for 3 seconds, 3mm for 4 seconds, 4mm for 5 seconds, etc., the rhinestone shelf will become foamy. I will come.

3. As soon as foaming is confirmed (without waiting), put it on the desired position and press down slightly. After that, press twice with a gloved finger.

*If you want to glue stones of different sizes, unplug the device and let it cool down before replacing the attachment. Two types of flat attachments are included. Please use the method of "pressing down" from the top while placing it in the adhesion position.